PLA Gradient Matte

Panchroma Gradient Matte (formerly PolyTerra Gradient PLA) runs through a colour sequence on one spool, so every layer shifts hue in a flat, matte finish. 🌈 Why you'll like it Colour that moves — the spool cycles through its colours as it prints. Matte finish — low-glare, like Panchroma Matte; Polymaker lists 1.37 g/cm³. Seasonal and rainbow sets — Polymaker gives cycle weights per set, from about 90 g up to 200 g. Recommended print settings Nozzle temperature 190–230 °C Bed temperature 25–60 °C Print speed up to 300 mm/s Drying 55 °C for 6 h These are Polymaker's recommended ranges — a starting guide. Every printer and hot-end is different, so fine-tune for your setup. Technical…