PLA Lightweight

PolyLite LW-PLA is a foamed PLA that prints on near-normal PLA settings but gives parts about half the weight. A very matte finish hides the layers, which makes it a favourite for models and anything that has to stay light. 🪶 Why you'll like it Half the weight — Polymaker lists 0.8 g/cm³ for the filament and about 0.6 g/cm³ for printed parts. Pre-foamed, not active foaming — it does not expand in the nozzle, so you keep your usual PLA settings (a little more retraction). Very matte — the finish hides layer lines. Recommended print settings Nozzle temperature 190–210 °C Bed temperature 25–60 °C Print speed 30–50 mm/s Retraction 3 mm at 40 mm/s Net weight 0.8 kg spool These are Polymaker's…